d&b Audiotechnik Ti10L Speaker Line Array Pasif 2×6.5 Inch 2 Way 16 Ohm 800 Watt (Waterproof)

Description

The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker. Road and installation versions differ only in the mounting hardware. The Ti10L cabinet is a passive 2-way design that houses 2 x 6.5″ drivers and a 1.4″ exit HF compression driver. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. The two 6.5″ neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies. The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware, which, once deployed, is fundamentally invisible when viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. Special Color (SC) or Weather Resistant (WR) versions are available. The Weather Resistant option provides an IP55 rating, and enables operation of loudspeakers in changing ambient conditions.

Spesifikasi

System data

• Frequency response (-5 dB standard) 68 Hz – 18 kHz
• Frequency response (-5 dB CUT mode) 120 Hz – 18 kHz
• Max. sound pressure¹
• with 10D 129 dB
• with D20/5D/30D 132 dB
• with D40/D80/40D 132 dB
• Cabinets per amplifier channel 4

¹ 1 m, free field, SPL max peak, test signal: pink noise with crest factor 4, one speaker driven. For possible performance deviations when using multiple loudspeakers, check 5D Powershare Calculator tool.