Description
The condenser microphone TG D58 has what it takes to achieve global success for years and years to come: sharp design and clear, natural sound. The minute microphone with the flexible gooseneck (20 mm) can be precisely aimed at sound sources like snare drums or rack toms. With the help of these features, everyone can find the perfect positioning for the ideal sound – on stage, in the rehearsal room or in a home studio.
The practical advantages of the patented microphone clamp on the TG D58c condenser microphone are immediately apparent whether when using with rack toms, snare drums or percussion instruments: the microphone can be mounted and positioned quickly and securely.
The balanced frequency response also makes it immediately ready for use. Pre-amplifiers are a thing of the past due to the integrated pre-amplifiers with downward-facing standard XLR connections. Its ability to operate at high levels compared to the previous model Opus 88 should also be mentioned, as is the newly designed, low-resonance housing, the elastic capsule suspension, the improved signal-to-noise ratio and technical values that remain valid even with phantom powering below 44 volts.
Features
- Short, flexible gooseneck with horizontal swivel joint for optimum positioning
- Rugged construction with rubber shock-mounted microphone capsule
- Patented microphone clamp with integrated pre-amp and XLR connection
- No disturbing cable between microphone head and pre-amp
- Cardioid polar pattern for high-gain-before feedback
- Wide transmission range
- Phantom powering 11 – 52 V
Specifications:
| Transducer type | Condenser (back electret) |
| Operating principle | Pressure gradient |
| Polar pattern | Cardioid |
| Frequency response Close miking | 20 – 20,000 Hz |
| Distant miking (measured at 1 m) | 35 – 20,000 Hz |
| Open circuit voltage | 5 mV/Pa (-46 dBV) ±2.5 dB |
| Nominal impedance | 200 ohm |
| Load impedance | 1 k ohm |
| Max. SPL at 24 V and 48 V phantom power | 140 dB |
| S/N ratio | 59 dB [CCIR; Q-Peak] 70 dB [A; RMS] |
| Equivalent SPL | 35 dB [CCIR; Q-Peak] 24 dB [A; RMS] |
| Power supply | Phantom power: 12 – 48 V (recommended: 48 V) |
| Power consumption | 4.7 mA |
| Connection | 3-pin XLR, male |
| Dimensions Clamp (W x H) | 85 x 118 mm |
| Gooseneck length | 20 mm |
| Weight | approx. 140 g |











