Portable, yet capable of producing an astonishing 131 dB SPL, the DXR10’s compact, functional design makes it ideal for a wide range of applications. Whether providing simple vocal/instrument amplification, very powerful floor monitoring or comprising a compact SR system—the DXR10 delivers without compromising sound quality and power.
High-power, Class D amplifier
The Yamaha DXR10 employs a 700W RMS Class D amplifier to serve up vibrant, dynamic sound reinforcement. The DXR10 is bi-amped, with a full 600 watts for the LF driver and 100 watts for the HF driver. The high wattage doesn’t just let the DXR10 get loud, it gives it the headroom needed to reproduce the dynamics and nuances in your music. And thanks to the ultra-lightweight Class D amplifier, the DXR10’s big sound is still convenient to transport.
Stellar sound quality
Yamaha used a lot of innovative technology to get the maximum sonic quality out of the DXR10 powered loudspeaker. For example, Yamaha’s FIR-X tuning technology is constantly optimizing the time alignment between the HF and LF drivers, reducing phase cancellations to greatly enhance bass frequency response as well as stereo imaging. Also, the non-resonant ABS enclosure is designed to resist vibrations at high output levels, greatly reducing distortion for the best sound at extreme levels.
Built-in three-channel mixer
While a pair of DXR10 powered loudspeakers makes a great sound system, especially when paired with a Yamaha DXS subwoofer, what about those situations where you just need a little bit of reinforcement without an entire sound system? Just turn the DXR10 around, and connect up to three microphones or line-level signals for instant amplification. The versatile nature of the DXR10 makes it the ideal loudspeaker for solo musicians, as well as schools and houses of worship that need a flexible sound system for multiple applications.
Yamaha DXR10 Powered Loudspeaker Features:
- High-powered portable loudspeaker with multi-use flexibility
- 10″ speaker, powered by 700W in a 2-way design
- Built-in 3-channel mixer lets you connect microphones or line-level sources directly without an entire PA system
- Built-in DSP for phase optimization and transparent dynamic control
- ABS cabinet is durable with a low-resonance design for maximum sound quality
|Speaker type||10″ 2-way, Bi-amp powered speaker, Bass-reflex type|
|Frequency range||-10dB||56Hz – 20kHz|
|Components||LF||Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite|
|HF||Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite|
|Crossover||FIR-X tuning™ (linear phase FIR filter)|
|Output power||Dynamic:1100W (LF: 950W HF: 150W) / Continuous: 700W (LF: 600W HF: 100W)|
|Maximum output level (1m; on axis)||131dB SPL|
|I/O connectors||INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1 ), LINK OUT: XLR x 1|
|Processors||D-CONTOUR: FOH/MAIN, MONITOR, OFF|
|Power requirements||100V – 240V, 50Hz/60Hz|
|Flying and mounting hardware||Top x2, Rear x1 (Fits for M8 x 15mm eyebolts)|
|Pole socket||35mm with 2-way features (0 or 7 degrees)|
|H||502mm (19 6/8″)|
|D||310mm (12 2/8″)|
|Net weight||14.6kg (32.2lbs)|
|Others||Material: ABS (Matte Finish, Black)|