FBT Mitus 206LA Speaker Line Array 6.5 Inch 600 Watt
ACTIVE PRECISION COVERAGE VERTICAL ARRAY – 600W + 300W – 134DB SPL
Cek Harga
Description
600W + 300W – 134dB SPL Active precision coverage vertical array
- 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
- 1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
- Frequency response from 68Hz to 20KHz
- Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
- DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
- Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
- 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
- High impact polypropylene gas-injected enclosure withintegrated rigging hardwareadjustable with 0° to 10°angle between cabinets at2° step
- Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage
- to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where the system is not directly exposed to the elements
- Wide range of hardware accessories for flying and ground stacked configurations
- Very lightweight, only 14Kg
Specification
Code: | 31708 |
Built-in amplifier LF/HF: | 600/300 W RMS |
Built-in amplifier peak LF/HF: | 1200/600 W |
Frequency response: | 68Hz – 20KHz -6dB |
Low frequency woofer: | 2 x 165 bobina 44 neodimio inch |
High frequency driver: | 1 x 36 bobina 64 neodimio inch |
Maximum SPL cont/peak: | 125/134 dB |
Dispersion: | 100°x10° max dipendente dal n° degli elementi H x V |
Input impedance: | 22 Kohm |
Crossover frequency: | 1.2 KHz |
Ac power requirements: | 640 VA |
Input connector: | XLR con loop |
Power cord: | 5 mm/inch |
Net Dimension (WxHxD): | 574x220x383 mm/inch |
Net weight: | 14 kg/lb |
Transport Dimension (WxHxD): | 655x455x280 mm/inch |
Transport weight: | 15.7 kg/lb |
Additional information
Warna | Hitam |
---|