Shure BETA 91A Kick Drum Microphone
Half-cardioid Kick Drum Microphone with 2-position Contour Switch, Integrated Preamp, and XLR Connector
Description
Kick drum microphone provides a strong low-end response and maximum gain-before-feedback due to its half-cardioid polar pattern. It features a two-position contour switch to maximize attack and clarity and a low-profile design.
The Shure BETA®91A is designed for use with kick drums, as well as other traditional low-frequency applications including piano. Featuring an updated microphone capsule, integrated preamplifier, and XLR connection, Beta 91A offers a strong low-frequency response and is specifically tailored for bass frequency applications. The Beta 91A combines superior attack and punch for studio-quality sound, even at extremely high sound pressure levels (SPL).
Features
- Uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
- Precision-engineered low-profile design features integrated preamplifier and XLR connector to maximize setup efficiency while minimizing stage clutter
- Frequency response tailored for kick drum/low frequency applications with a wide dynamic range for use in high SPL environments
- Two-position contour switch to maximize attack and clarity depending on application: select the flat response setting for natural sound in most applications or the “low-mid scoop” setting for a strong low frequency “punch” with plenty of higher frequency attack
- Requires no external mounting or accessories for ease of use and storage
- Furnished with zipper pouch
Additional information
Koneksi | Kabel |
---|
Spesifikasi
Capsule | Electret Condenser |
Polar Pattern | Half-Cardioid |
Tone Adjustment | Low Cut: -7 dB at 400 kHz |
On-Board Controls | LF |
Frequency Range | 20 Hz to 20 kHz |
Maximum SPL | 155 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) 151 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load) |
Impedance | 146 Ohms |
Sensitivity | -48.5 dBV/Pa 3.8 mV/Pa |
Dynamic Range | 125.5 dB |
Signal-to-Noise Ratio | 64.5 dB |
Equivalent Noise Level | 29.5 dB SPL A-Weighted (Typical) |
CMRR | 55 dB |
Output Connectors (Analog) | 1 x XLR 3-Pin |
Operating Voltage | 11 to 52 V (Phantom Power) |
Operating Current Consumption | 5.4 mA |
Dimensions | H: 3.7 x W: 0.8 x L: 5.5″ / H: 95.1 x W: 20.3 x L: 139.1 mm |
Weight | 16.6 oz / 470 g |
Package Weight | 1.85 lb |
Box Dimensions (LxWxH) | 10 x 5 x 3.4″ |