ROLAND RSS S4000-3208 Digital Snake 32×8
Description
The S-4000S-3208 is a component of the S-4000 Digital Snake System. It has 32 inputs, 8 outputs and redundant Ethernet connectors. It is typically used on the stage providing 32 mic/line inputs and 8 outputs or returns. Each channel has remotely switchable Phantom Power as well as a 20 dB pad. The professional quality XR-1 mic preamps are remotely controllable in zipperless 1dB steps using the S-4000R Remote Controller or a Mac or PC using the free RSS-RCS software. The preamps have been designed for live sound applications and provide superb audio quality with 28 dB of headroom.
The redundant Ethernet connectors are rugged Neutrik Ethercon connectors configured as Main and Backup. In case the Main cable is compromised, the system will automatically and seamlessly switch to the Backup cable and light an Indicator LED. In addition to redundant Ethernet connectors and an optional redundant power supply, the unit has a covered power switch to prevent accidental power loss as well as a power cable security bracket. The S-4000S-3208 is rack mountable and provides flush or recessed mounting positions so that a cover can be placed on its rack case while connectors are still in place.
S-4000S 40-channel I/O Modular Rack The S-4000S is the stage connection interface for the S-4000 System. Its modular design supports 40 channels of audio input and output (I/O). As standard, it comes in a 32×8 configuration-32 audio inputs and 8 audio outputs. The “modular” aspect of the S-4000S is in its connectivity. The unit’s chassis provides 12 slots for various RSS modules.
The standard 32×8 configuration includes: – Eight SI-AD4 Input Modules-Each SI-AD4 contains four balanced audio inputs with variable gain preamps, phantom power, and pad. Additionally, each input is equipped with a 24-bit/96kHz A/D converter. Two SO-DA4 Output Modules-Each SO-DA4 contains four balanced line level audio outputs. Additionally, each output is equipped with a 24-bit/96kHz D/A converter. – One S-REAC2 Module-This module provides two REAC connection ports-one for the main REAC connection, the other for a redundant backup. – One S-BP Blank Panel-This panel covers the final unused module slot. An optional RSS module can be installed here.
RSS S-4000S 40 CH I/O Modular Rack Features:
- Modular “stage box” with 32 inputs and 8 outputs on XLR connectors.
- All new, precision-designed XR-1 preamps with massive headroom and clean, warm sound (gain range from -65 to +10 dBu typical, +28 dBu maximum input level).
- Audio signal and system status indicators.
- Two REAC ports (one primary, one redundant).
- RS-232C interface for S-4000R Remote Controller or computer control.
- MUTE ALL OUTPUTS button for noise-free connection of audio sources.
- Connection port for optional redundant power supply.
RSS S-4000 System 32 x 8 Features:
- 40 channels of 24bit 96kHz audio over one Cat 5e cable
- 80 channels over two Cat 5e cables.
- Unlimited, lossless input splits using standard, inexpensive Ethernet hardware.
- New, precision designed VM-50 preamps with superb headroom and audio characteristics.
- Remote control for the smooth, zipper-free control of preamp gain, individual phantom power, and -20db pad.
- Free Mac/PC software for additional control via RS-232
- Preset memories of preamp settings for fast setup and stage changes
- Redundant Cat 5e port for main audio cable redundancy
- Redundant power supply option for complete system reliability
- Very low protocol latency @ 375 microseconds (that’s .0375 seconds!)
- Total System latency typically 1 millisecond
- Modular design for flexible configuration options and future expandability
Spesifikasi
Channels | Balanced XLR 32 in, 8 Out / 32 Out, 8 in |
AD/DA Conversion | Sample Rate: 96kHz Signal Processing: 24 Bits |
Frequency Response | -2dB / 0dB (20Hz to 20kHz @ +4dBu) |
Residual Noise | -92dBu |
THD & Noise | 0.05% or less (Pad: On, Input gain +4dBu, 22Hz – 20kHz) |
Connectors | Input: 32 XLR Balanced, Phantom Power, 4-ch Input Module x8 Output: 8 XLR Balanced, 4 Channel Module x2 REAC: Main, Backup RJ-45, EtherCon-type Remote Connector 1″ RS-232C, DB-9 Type MIDI Connectors: In, Out (5-pin, DIN Type) |
Pad | 20dB On/Off |