Description
Mackie continues to create live-sound solutions with the PPM Series powered mixers. These PPM mixers are surprisingly lightweight, but tremendously powerful with the PPM1012 sporting two individual power amps, with one 800-watt power amp handling the mains and one delivering 800 watts to the monitors. Mackie designed the PPM1012 with Class D amplifiers that produce maximum power with minimum heat. A built-in limiter protects your speakers from damaging peaks. All of these design elements merge to create a rugged and powerful mixer to make the PPM1012 the centerpiece of your live rig.
Mackie PPM1012 Features:
- Full-featured 12-Channel, 1600W (800W mains and 800W monitors) Powered Desktop Mixer
- 4-segment LEDs and solo PFL on every channel
- 800W + 800W Mackie designed Class-D, Fast Recovery power amplifiers
- 32-bit dual RMFX+ processor featuring 24 “Gig Ready”, useable reverbs, choruses, and tap delay for live applications
- 8 mic/line mono inputs and 2 stereo line inputs for flexible connectivity
- Mackie high-headroom, low-noise mic preamps with RF rejection for pristine signal
- New Dedicated In-line Compression provides increased presence and punch for vocals and instruments
- Mackie’s 3-Band EQ with a Mid sweep (100Hz-8kHz) on mono channels & 4-band active EQ on stereo line channels 7 & 8
- 2 built-in DI boxes for direct instrument connections on channels 7 & 8
- 4 Aux sends – 2 FX & 2 Mon
- Dual 9-band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
- Mono output with level control & lowpass filter selectable from 75Hz-100Hz
- 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
- Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
- 48v Phantom power available for all mic inputs
- Headphone output with level control
- 12v BNC lamp Jack
- Metal chassis with a handle built into the front of the mixer for easy transport
- Rack ears included
- Lightweight and portable (29lbs)
Spesifikasi
Power Rating | Dual 800 Watt Amplifiers for 1600 Watts of Total Peak System Power |
Mic/Line Inputs | 3-pin XLR Microphone x8 1/4″ Phone Mono Line x6 L/R Stereo 1/4″ Phone Line x2 L/R Stereo RCA Phono Line x2 1/4″ Phone Mono Line/Instrument x2 |
Mains Inputs | Unbalanced 1/4″ Phone A/B x2 |
In-Line Inputs/Returns | No |
Aux Sends | MON1 Send – 1/4″ Phone FX/MON2 Send – 1/4″ Phone |
Aux Returns | No |
Inserts | 1/4″ TRS Phone All Mono and Instrument / Line Inputs |
BUS (Group) Outputs | MAIN Left/Right – L/R Stereo 1/4″ Phone |
Main Output | Speaker Outputs – A/B Speakon and 1/4″ Phone Connectors |
Tape I/O | L/R RCA Phono |
Monitor Outputs | MON1 Send – 1/4″ Phone FX/MON2 Send – 1/4″ Phone |
EQ Section | Channel EQ High Shelving: +/- 15dB @ 12kHz Mid Peak Sweep (Mono chs): +/- 15dB Mid Sweep Range: 100Hz to 8kHz Hi Mid Peaking (Stereo chs): +/- 15dB @ 2.5kHz Lo Mid Peaking (Stereo chs): +/- 15dB @ 400kHz Low Shelving: +/- 15dB @ 80Hz 9-Band Graphic EQ Main and Monitor 1: +/- 15dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k and 16kHz |
Solo/Mute | No |
Channel Level Control | Rotating Pot Controls |
Trim/Gain Control | Rotating Pot Controls |
Phantom Power | +48V |
Metering | Stereo Peak LEDs |
Frequency Response | Mic Mono Inputs: < 10Hz to 80kHz Line Mono Inputs: < 10Hz to 40kHz Line Stereo Inputs: < 10Hz to 75kHz |
Signal-to-Noise Ratio | -128dBu |
Total Harmonic Distortion (THD) | Mic Mono: < 0.007% High Gain Mic Mono: < 0.005% Low Gain Line Mono: < 0.005% Low Gain Line Stereo: < 0.01% at Main Out |
Power Supply | 120VAC 50/60Hz 680W |
Dimensions | 19.2 x 17.4 x 5.2″ (487 x 442 x 133mm) |
Weight | 29 lbs (13.2kg) |
Packaging Info
Package Weight | 37 lb |
Box Dimensions (LxWxH) | 24 x 23 x 10″ |