Lab Gruppen IPX 1200 1200W 2-Channel Power Amplifier With DSP
Compact 1200W 2-Channel DSP Controlled Power Amplifier
Description
IPX Series
High power density, competitive cost and power consumption efficiency make the IPX 1200 the ideal compact yet powerful amp solution whether it’s for permanent installations, portable corporate AV systems, or live PA setups.
Muscles Meet Mind
Delivering 2 x 600 W at 4 ohms, the IPX 1200 packs reliable power and performance into a single rack space. But raw muscle power is not enough. At the heart of the IPX platform, you’ll find a cutting-edge DSP engine equipped with up to 40 real-time, multi-slope parametric EQs along with adjustable gain, input, and output delay – and both high- and low-pass filters adjustable to any frequency.
The DSP also provides extensive protection for your loudspeaker system in the form of the innovative software-controlled Speaker Protect Limiter. You can configure this with ease from within the IPX Controller software.
Maximum Output Power*
| 2 Ω per channel, stereo | 500 W |
| 4 Ω per channel, stereo | 600 W |
| 8 Ω per channel, stereo | 300 W |
Controls
| Front | Power switch DSP section rotary push-encoder Buttons for Menu, Back, Mute (per channel) |
System
| Number of channels | |
| Output voltage | 70 V peak / 50 Vrms / 36.2 dBu |
| Input sensitivity for maximum output voltage | 6 dBu |
| Output current | 16 Arms |
| Output circuit type | Class-D |
| THD+N | < 0.1%, 20 Hz – 20 kHz @ 1 W < 0.05% @ 1 kHz, 1 dB below clip |
| Output noise | -66 dBu, A-weighted |
| Signal-to-noise | > 102 dB |
| Channel crosstalk | > 80dB @ 1 kHz |
| Frequency response | 10 Hz to 20 kHz, +0.5/-1 dB 5 Hz to 40 kHz, -3 dB |
| Common mode rejection (CMR) | > 50 dB |
| Gain (all DSP controls set to 0 dB) | 30 dB |
Indicators
| Power | Red LED |
| Limit, per channel | Red LED |
| Signal / mute, per channel | Green/Red LED |




