DAS SARA-SUB Subwoofer Aktif 18 Inch 6000 Watt
Powered, 2x 1500 W, 1x 18″ +1x 15″, Cardioid high performance subwoofer, for stacking/flying, ALMA, black
Description
SARA-SUB is a high-fidelity subwoofer that offers an accurate and powerful bass response thanks to its cardioid design. The system incorporates a DAS 18UXN neodymium loudspeaker with a 4″ voice coil for excellent low-frequency reproduction. In addition, a rear 15FWN neodymium 3″ voice coil speaker creates the necessary cardioid dispersion pattern to compensate for unwanted energy in the rear.
The SARA-SUB’s built-in class D amplifier has 4 channels in bridge mode for each of the speakers. The switch-mode power supply has a correction factor, allowing for greater efficiency and reliability under all operating conditions. The built-in DSP optimizes the signal parameters for the loudspeakers and allows for 14 dB of rear power compensation in the 40 Hz – 80 Hz range.
The enclosure design meets the strict DAS standards for the use of high-quality materials, such as birch plywood and ISO-flex™ exterior protection. In addition, the rigging system allows the SARA to be flown underneath the SARA-SUB, using the JP-SARA. The metal grids incorporate acoustically transparent, moisture-repellent fabric. Recessed handles on the sides of the enclosure facilitate transport and handling.
Features
Compact cardioid powered subwoofer18” 18UXN front neodymium transducer with 4” VC 15” 15FWN rear neodymium transducer with 3” VC
4-channel, 3000 Wrms Class D amplifier
SARA rigging bumper-compatible flying hardware
Applications
Outdoor festivals and live concerts
Theatres, auditoria and performing arts centres
Medium size live events
Rental services
Worship centres
| Performance | |
| Frequency Range (-10 dB) | 35 Hz – 125 Hz |
| Maximum Linear SPL1 | 134 dB |
| Maximum SPL2 | 138 dB |
| 1. Measured Maximum Linear SPL at 1m according to AES75 standard using 18dB crest factor M-Noise. 2. Measured Maximum SPL at 1m using burst noise. |
|
| Electronics and Connectors | |
| Nominal Amplifier Power (continuous) | 3000 W |
| Nominal Amplifier Power (peak) | 6000 W |
| Input Type | Balanced Analog |
| Input Impeadance | 20 kohms |
| Input Sensitivity | 6.2 V (+18 dBu) |
| Audio Signal Input Connector | 1 x Female XLR |
| Audio Signal Loop Thru Connector | 1 x Male XLR |
| Audio/Data Input Connector | etherCON |
| Control | ALMA |
| Audio + Data Loop Thru Connector | etherCON |
| AC Output Connector | powerCON TRUE1 |
| Current Draw 230 V / 115 V | 4 A / 8 A |
| Sampling Rate | 96kHz |
| Enclosure | |
| Enclosure Construction | Birch Plywood |
| Enclosure Geometry | Rectangular |
| Rigging | Captive Rigging System |
| Finish | ISO-flex Paint |
| Color | Black |
| IP Rating | IP43 |
| Dimensions ( H x W x D ) | 590 x 660 x 790 mm 23,5 x 26,0 x 31,2 in |
| Net Weight | 67,0 kg ( 148,0 lb ) |
| Components | |
| LF Driver | 18UXN |
| LF Cardioid Driver | 15FWN |










