DAS LARA-SUB Subwoofer Line Array Aktif 3×18 Inch 7200 Watt
Powered, 3x 1200 W, 3x 18″, Cardioid high performance 2-way subwoofer, for stacking/flying, ALMA, black
Description
The LARA-SUB is a powered cardioid subwoofer system incorporating 2 DAS 18UXN neodymium low frequency transducers with 4” voice coils in a bass-reflex configuration. A single rear-facing 18UXN is used to create the cardioid dispersion pattern avoiding unwanted energy behind the system.
Powering the LARA SUB is a 3 channel Class D amplifier with independent channels powering each of the front-loaded low frequency transducers and the rear facing cardioid speaker. The amplifier´s regulated switch mode power supply is equipped with power factor correction reducing power consumption while enhancing reliability and consistency in all operating conditions. The onboard DSP optimizes the signal parameters for front and rear drivers to maximize the rear rejection 14 dB from 40 Hz – 80 Hz average.
Cabinet construction follows DAS´s strict construction standards employing birch plywood and the durable ISO-flexTM protective exterior coating. The LARA SUB incorporates captive rigging hardware that makes use of the common LARA rigging bumper, only one bumper type is needed to fly either LARA ARRAY or LARA SUB. The protective metal grilles are backed using acoustically transparent and water repellent fabric. Two recessed handles are located on each side of the enclosure.
Features
Cardioid powered subwoofer
3 x 18” 18UXN neodymium transducers with 4” VC
6-channel, 3600 Wcontinuous Class D amplifier
LARA rigging bumper compatible flying hardware
Applications
Outdoor festivals and live concerts
Theatres, auditoria and performing arts centers
Large live music clubs
Live sound touring/Rental services
| Performance | |
| Frequency Range (-10 dB) | 28 Hz – 125 Hz |
| Maximum Linear SPL1 | 140 dB |
| Maximum SPL2 | 144 dB |
| 1. Measured Maximum Linear SPL at 1m according to AES75 standard using 18dB crest factor M-Noise. 2. Measured Maximum SPL at 1m using burst noise. |
|
| Electronics and Connectors | |
| Nominal Amplifier Power (continuous) | 3600 W |
| Nominal Amplifier Power (peak) | 7200 W |
| Nominal Amplifier Power LF (continuous) | 3 x 1200 W |
| Nominal Amplifier Power LF (peak) | 3 x 2400 W |
| Input Type | Balanced Analog |
| Input Impeadance | 20 kohms |
| Input Sensitivity | 6.2 V (+18 dBu) |
| Audio Signal Input Connector | 1 x Female XLR |
| Audio Signal Loop Thru Connector | 1 x Male XLR |
| Audio/Data Input Connector | etherCON |
| Control | ALMA |
| Audio + Data Loop Thru Connector | etherCON |
| AC Output Connector | powerCON TRUE1 |
| Current Draw 230 V / 115 V | 7.5 /15 A |
| Sampling Rate | 96kHz |
| Enclosure | |
| Enclosure Construction | Birch Plywood |
| Enclosure Geometry | Rectangular |
| Rigging | Captive Rigging System |
| Finish | ISO-flex Paint |
| Color | Black |
| IP Rating | IP43 |
| Dimensions ( H x W x D ) | 555 x 1.170 x 1.015 mm 21,9 x 46,0 x 40,0 in |
| Net Weight | 125,0 kg ( 275,0 lb ) |
| Components | |
| LF Driver | 18UXN |
| LF Cardioid Driver | 18UXN |




