Boss OD-200 Hybrid Drive Effects Pedal
Description
Offering 12 distinct drive modes plus a convenient three-band EQ for fine-tuning your tone, the BOSS OD-200 Hybrid Drive Pedal may be one of the most versatile overdrive/distortion pedals you’ll find. Looking for edge-of-breakup, amp-style grit? It’s here. Need ’80s-style face-melting distortion? You’ll find it here too, and everything in between. And if you need to cover a lot of styles in a single set, you’ll appreciate the ability to connect external controllers like footswitches, expression pedal, and MIDI controllers for advanced control options. If you’re looking for a does-everything drive pedal that actually does everything really well, you definitely need to check out the BOSS OD-200 Hybrid Drive Pedal.
Advanced gate circuit for ultra-tight high-gain tones
Few things feel as empowering as cranking up the gain and chugging some palm-muted riffs on your guitar at high volume — and few things sound as sloppy when you’re not gating your signal. Thankfully, the BOSS OD-200 Hybrid Drive Pedal that eliminates noise and tightens your sound without deadening your attack transients, eliminating your need for a dedicated gate pedal.
Boost function with your choice of pre- or post-gain operation
Guitarists at Sweetwater know the value of having a boost pedal or two on your pedalboard, and thankfully the BOSS OD-200 offers a boost function with flexibility. Want to boost your volume going into your overdrive or distortion to push it over the edge? Set the boost to pre-gain operation. Want to push your amplifier over the top without changing your core overdrive tone? Set the boost to post-gain operation. These settings are saved with your custom presets, so you can tailor the boost function to every custom patch you create.
Digital that doesn’t sound digital
The OD-200 combines the best of analog and digital drive technology to deliver tone you’ll be proud to crank up. Even at extreme gain values, the BOSS OD-200 drive tones sound complex and dynamic, thanks to internal 32-bit digital processing and 96kHz resolution.
BOSS OD-200 Hybrid Drive Pedal Features:
- Overdrive and distortion effects pedal with 12 distinct drive modes
- 3-band EQ allows you to fine-tune your tone for any application and any instrument
- Switchable gate function tightens up your sound and reduces noise in high-gain applications
- Boost function can be set to pre-gain operation to push your drive, or post-gain to increase volume without altering your drive tone
- Four memory slots allow you to save and instantly recall your own custom patches
- Ample support for external controllers including expression pedal and MIDI I/O (MIDI cables sold separately)
- Panel Lock function allows you to lock the controls to prevent unwanted changes
- High-quality 32-bit digital conversion with 96kHz resolution for pristine sound quality even at extreme gain settings
- Buffered bypass maintains your tone even over long cable runs
- Micro USB jack for future functionality expansion via firmware updates
Spesifikasi
| Sampling Frequency | 96 kHz |
| AD/DA Conversion | 32-Bit |
| Processing | 32-Bit Floating Point |
| Modes | 12 Modes: Overdrive, Blues, Scream, CNTR OD, X-Drive, Dist, X-Dist, Stack Drive, Fat Dist, Brown, X-Metal, Fuzz |
| Memory | 4 + Manual |
| Nominal Input Level | Input A/Mono and Input B: -10 dBu |
| Maximum Input Level | Input A/Mono and Input B: +7 dBu |
| Input Impedance | Input A/Mono and Input B: 1 Megohm |
| Nominal Output Level | Output A/Mono and Output B: -10 dBu |
| Maximum Output Level | Output A/Mono and Output B: +7 dBu |
| Output Impedance | Output A/Mono and Output B: 1 Kilohm |
| Recommended Load Impedance | Output A/Mono and Output B: 10 Kilohms or Greater |
| Bypass | Buffered |
| Controls | Mode Knob Drive Knob Level Knob Low Knob Middle Knob High Knob Parameter Knob Parameter Button Memory Button Memory/Boost Switch On/Off Switch |
| Display | 7 Segments, 3 Characters (LED) |
| Connections | 2 x 1/4″ Instrument Inputs, Phone Type 1 x 1/4″ TRS CTL 1, 2 / EXP Input, Phone Type 2 x 1/4″ Instrument Outputs 1 x 3.5 mm TRS MIDI Input 1 x 3.5 mm TRS MIDI Output 1 x USB Port 1 x DC Input Jack |
| Power Supply | 3 x Alkaline Batteries, AC Adapter (Available Separately) |
| Current Draw | 220 mA |
| Expected Battery Life | Approximately 6 Hours |
| Dimensions (W x D x H) | Without Rubber Feet: 4.0 x 5.4 x 2.5″ / 10.1 x 13.8 x 6.3 cm With Rubber Feet: 4.0 x 5.4 x 2.6″ / 10.1 x 13.8 x 6.5 cm |
| Weight | With Batteries: 24 oz / 670 g Without Batteries: 22 oz / 600 g |
| Package Weight | 2.335 lb |
| Box Dimensions (LxWxH) | 7.8 x 6.7 x 4.3″ |













