BOSCH DCNM-WAP Wireless Access Point
The DICENTIS Wireless Conference System uses standard Wi-Fi and smart wireless management to ensure interference-free and highly flexible wireless conferencing.
Description
FEATURES
- Stand alone usage, no central control unit needed
- Based on standard WiFi according IEEE 802.11n
- WPA2 encryption for secure communication
- Seamless frequency switching in the 2.4 GHz and 5 GHz band
- Powering via power supply adapter, Power over Ethernet (POE) or DICENTIS multimedia System Network Cable
Wireless Conference Devices
Two different devices are available: the Wireless Device and the Wireless Device Extended.
Government-grade security
All wireless signals within the system are encrypted with WPA2, a highly secure standard encryption method used by mobile devices to guarantee protection against tapping or eavesdropping. As the system uses standard Wi-Fi, it can follow the WPA2 standards as they evolve. Connections to the system can be controlled by the available subscription mode, to allow wireless devices to be added easily to the system.
Easy camera configuration
Built-in support for automatic camera control of up to 6 Bosch HD Conference Dome cameras means there is no need for third-party software applications. Configuration of these cameras can be done via a built-in web browser. If only one camera is used, no additional hardware is required.
Smooth configuration and control of system
A built-in web browser provides extended functionality and control. True wireless connectivity enables direct connection to the WAP with any tablet or laptop and without the need for additional equipment, such as a router.
Acoustic excellence
Advanced audio processing enables the microphone and loudspeaker to be active at the same time, resulting in a face-to-face meeting experience. The system also makes use of built-in and intelligent Acoustic Feedback Suppression developed by Bosch. It automatically adapts itself to the environment and maximizes speech intelligibility when higher volumes are required.
Enjoy continuous audio
Packet Loss Concealment allows the system to automatically predict what a damaged or lost packet should be and fills the gap, resulting in continuous audio without losses. This is a unique capability that no other competitive product offers
SPECIFICATION
| Supply voltage (PSU) | 100‑240 Vac 50‑60 Hz in48 Vdc out |
| PoE | 802.3af, 802.3at – type 1 mode A (endspan), mode B (midspan) |
| DCNM system supply | 48 Vdc |
| Power consumption | 10 W |
| Frequency response | 80 Hz – 20 kHz |
| THD at nominal level | <0.1 % |
| Dynamic range | >98 dBA |
| Signal‑to‑noise ratio | >96 dBA |
| Ethernet | 1000Base‑T IEEE 802.3ab |
| Jack nominal | -18 dBV |
| Jack maximum | +18 dBV |
| Jack nominal | -18 dBV |
| Jack maximum | +20 dBV |
| WIFI standard | IEEE 802.11n |
| Frequency Range | 2.4 GHz and 5 GHz (ISM license free) |
| Mounting | Ceiling, Wall or Tripod floor stand (using included bracket) |
| Dimensions (H x W x D) with bracket | 285 x 202 x 65 mm(11.2 x 8.0 x 2.6 in) |
| Weight: with bracket without bracket | 958 g (2.11 lb)725 g (1.60 lb) |
| Color | Light grey (RAL 000 7500) |
| Operating temperature | 5 ºC to +45 ºC(41 ºF to +113 ºF) |
| Storage and transport temperature | -20 ºC to +70 ºC(-4 ºF to +158 ºF) |
| Relative humidity | < 95 %, > 5 % |











