Description
Apple series amplifiers are a cost effective solution for demanding commercial audio applications. The amplifiers are varies from 2U to 3U. The 3U amplifiers deliver up to 1700W RMS output. The protection circuitry employed in the design ensures the integrity of the amplifiers under overload conditions. The circuit even protects the amp when a total short circuit is applied across the output terminals. The “soft start” limiter will immediately shut down the output drive in the overload or short circuit conditions, which ensure the reliability of the amplifiers. Stylish in appearance, they are prefect to be installed in those commercial applications such as pubs, nightclubs, mobile DJS, cinemas and sporting venues. The 3U amplifiers are very perfect for driving subwoofers. The sound is unprecedented rich and powerful.
- Stylish design as well as rugged heavy duty construction
- Soft start limiter
- XLR jack inputs
- Binding post& 4 pin speaker connector
- Clipping &overload protect indicators
- Efficient cooling design
- Standard 19″ rack mounting
Model | Apple31300 |
Output power STEREO | 8 ohms 2x1300W |
EIA 1KHz THD≤1% | 4 ohms 1800W |
BRIDGE | 8 ohms 3600W |
Frequency response | 10Hz-50KHz -1.5dB |
Input sensitivity | 0.77V/1V/1.4V |
Maximum input level | 21dBV/9V |
Input impedance | 20K ohm |
S/N ratio | >100dB |
Crosstalk | > 70dB |
Damping factor f=1kHz 8 ohms | >200 |
Slew rate internal | 40V/цs |
Protection | SHORT CIRCUIT,LIMITER,OVER CURRENT,SOFT START,OVER HEAT |
Indicators | POWER(BLUE) PROT(YELLOW) CLIP(RED) BR(GREEN) PAR(GREEN) |
Cooling | SMART FAN |
Front panel controls | LEVEL ACH, BCH POWER SWITCH |
Rear panel controls | STEREO/BRIDGE/PARALLEL MODE SWITCH |
Connector | XLR BALANCED INPUT, 6.35MM BALANCED INPUT,PROFESSIONAL |
SPEAKON OUTPUT,PROFESSIONAL BINDING POSTS OUTPUT | |
Power supply | AC 220V-240V/50Hz |
Product/shipping dimensions(WXDXH) | 482x450x132(585x560x185)mm |
N.W/G.W | 31.1kg /33.10kg |